News

28.03.2019

Pipetronics expands eMULTI system

3 in 1: One system for filling, grouting
» Read more

Dates

13.02.2020

IRO 2020

13.02.2020 - 14.02.2020 - IRO 2020, Oldenburg, Germany
» Read more
12.03.2020

33. Lindauer Seminar

» Read more
04.05.2020

IFAT 2020

04. - 08. May 2020 - IFAT 2020, Munich, Germany
» Read more

EPOXONIC® EX 1824 rapid

Overview

EPOXONIC® EX 1824 RAPID formwork resin is a solvent-free, dual component formwork resin with an epoxy resin amine basis and an especially low density. It is easy to make the resin flexible, and it has a high inner ductility, allowing the material to compensate for small amounts of mechanical tension. It was specially developed for underwater applications.

EPOXONIC® EX 1824 RAPID formwork resin

Areas of application

EPOXONIC® EX 1824 RAPID formwork resin is especially well suited to renovate damaged side branches in waste water, mixed, and rain water sewers in nominal widths between DN 150 and DN 800 using robots. Sewers can be made of stone, clinker, concrete, fibre cement, reinforced concrete, or PVC. Its characteristics are adjusted so as to quickly achieve complete filling when using formwork.

When used correctly (mill to create a grease-free surface), it creates a pressure-tight result which can bear heavy structural loads. EPOXONIC® EX 1824 RAPID FORMWORK RESIN can also be used in waste water sewers in airport areas, since it is resistant to kerosene and typical de-icing agents.

Product characteristics

  • Solvent-free
  • Good processing
  • Low density
  • Adhesion to wet concrete
  • Curing above +8 °C possible
  • Curing under water possible
  • Low-shrinkage
  • Specially designed for robot applications
  • Inner ductility, making it suitable for sewer inlets
  • Resistant to household waste water, oil, and petrol, for instance
  • Resistant to hot water
  • Adheres to PVC and liner materials

Technical data

EPOXONIC® EX 1824 RAPID - Characteristics (data sheet excerpt)

Type, colour

Component A: blue, component B: grey, mix: blue

Mixing ratioComp. A : Comp. B = 100 : 39 parts
Shore hardness (23 – 25 °C)82 Shore D (DIN EN ISO 868)
Densityapprox. 1.04 g/cm³ (SN EN ISO 1183)
Pressure-tightness136.9 MPa (SN EN 196)
Flexural strength26.1 MPa
Shear strength12.2 MPa
Adhesive strength
- dry concrete
3.14 MPa
> 3 MPa
Pot life10 °C approx. 100 Min
20 °C approx. 50 Min
30 °C approx. 25 Min
Delivery methodComponent A - 31 tinplate cans
Component B - sealed aluminium / plastic bags
large - 2.10 kg component A + 0,82 kg component B
small  - 1.27 kg component A + 0.50 kg component B
PMO-Can - 1,87 kg component A + 0,73 kg component B

EPOXONIC® EX 1824 RAPID

EPOXONIC® EX 1824 RAPID

Your contact partners for ordering resins

Germany

Service centre Rheda-Wiedenbrück

Contact partner: Yilmaz Saglam
Phone: +49 5242 183 899-0
E-mail: y.saglam(at)pipetronics.com

 

Service centre Gelsenkirchen

Contact partner: Heinrich Colkos
Mobile: +49 (0) 170 454 58 37
E-mail: h.colkos(at)pipetronics.com

 

Service centre Röthenbach

Contact partner: Matthias Kast
Phone: +49 (0) 911 477 192 - 17
Mobile: +49 (0) 151 5716 70 74
E-mail: m.kast(at)pipetronics.com

Switzerland

Service center Dübendorf

Contact partner: Jason Sharp
Mobile: +41 (0) 7634 65 986
E-mail: j.sharp(at)pipetronics.com