Merge of Pipetronics and Pipe-Seal-Tec» Read more
Virtual RO-KA-TECH» Read more
2. Kanalmeile 2023» Read more
iPEK - Open Day» Read more
21. Deutscher Schlauchlinertag and 12. Deutscher Reparaturtag» Read more
Our Pipe-Seal products are suitable for the repair of pipelines in the dimension range of DN 150 - 800 for our products Pipe-Seal-Fix and Pipe-Seal-End and in the dimension range of DN 200 - 600 for our Pipe-Seal-Flex.
This is a mounting system made of stainless steel V4A–grade and a compression seal made of EPDM, which can be used continuously and mechanically in the corresponding application areas and dimensions.
Damage repairs are carried out by means of a permanent contact pressure of the respective stainless steel sleeve in conjunction with an EPDM rubber seal on the existing pipe wall.
Our system is characterized by the following optimizations:
- a new locking system,
- secure locking of the sealing collar,
- the possibility of conical mounting of the sealing collar.
Our patented innovations will inspire professionals in sewer rehabilitation.
Pipe-Seal-Fix1 is reliably suited for single installation or for overlapping rows to so-called line offset in case of larger defects.
1Internal sealing collars with improved locking mechanism according to German patent No. 10 2012 111 341, German utility pattern No. 20 2012 012 667. 9 and international patent application No. PCT/EP 2013/074 424. According to your request, we can also provide custom-made products or the tool for installation on loan or for purchase. Please contact our sales office in Gelsenkirchen, +49 (0) 209 38655-200 or e-mail seals(at)pipetronics.com
Pipe-Seal-Flex2 can be used for sleeve misalignment and axial offsets. Due to the lamellar openings in the stainless steel sleeve in use with the EPDM sealing element, the sleeve attaches itself to the pipe wall and can thus restore the tightness and functionality of the old pipe.
2Internal sealing collars with deformable intermediate section according to German utility pattern No. 20 2013 103 336. 7
The liner end collar (LEM) Pipe-Seal-End3 permanently seals between the liner surface and the waste pipe or shaft even in the event of pressing groundwater, while protecting the liner cutting edges from damage.
3Internal sealing collars with improved locking mechanism according to German Patent No. 10 2012 111 341, German utility pattern No. 20 2012 012 667. 9 and International Patent Application No. PCT/EP 2013/074 424. According to your request, we also provide custom-made products or the tool for installation on loan or for purchase. Find out more with our sales team in Gelsenkirchen +49 (0) 209 38655-200 or e-mail seals(at)pipetronics.com
Means of use:
Service water, waste water, salt water
EPDM, NBR, SBR
Stainless steel quality:
1. 4571 and 1. 4404, AISI 316 Ti, according to EN 10 020; duplex
Internal pipe pressure 1 bar (Pipe-Seal-Flex DN 200 - 400 to 0. 7 bar; >DN 400 - 600 to 0. 5 bar), external pipe pressure 1 bar
(Pipe-Seal-Flex DN 200 - 400 up to 0. 7 bar; >DN 400 - 600 up to 0. 5 bar), vacuum/vacuum suitable and adapted
Pipe tolerances, misalignments:
- Compensation of standard tolerances in pipe diameter
- Pipes with sleeve misalignment, axial offset and conical expansion (Pipe-Seal-Flex)
-20° C to 140° C (EPDM), different temperature ranges on request
Vitreous ceramic, steel, reinforced concrete, concrete, asbestos cement, grey cast iron, GRP, PP pipes, PE
250 mm, 300 mm (Pipe-Seal-End); 420 mm, 500 mm (Pipe-Seal-Fix and Pipe-Seal-Flex)